True Value Rental

St. Peters Hardware & Rental Inc.

Product Catalog

Working height 51 ft

Platform height 45 ft

Horizontal outreach (from centerline) 27 ft

Horizontal outreach (from edge of footpad) 21 ft

Up and over height 20 ft 9 in

Lift capacity 500 lbs

Length - stowed 20 ft 8 in

Width stowed 5 ft 6 in

Height stowed 6 ft 8 in

Platform size 4 ft 1 in x 2 ft 9 in

Turntable rotation 350° non-continuous

Jib - length 4 ft 3 in

Jib - Vertical Motion 150° (+70 / -80)

Tow speed rating 65 mph

Leveling capability 12.5 °

Tire size ST 225/75 R15

Cleans 3/4" – 2-1/2" dia. drain lines

10 GPM

The Gulper II Flood Pump is designed to be the most efficient way to extract water from carpet at any water-damaged facility. It is powerful enough to tackle the toughest recovery jobs, yet is easy to use. Structural damage, electrical hazards, pathogenic bacteria, mold and mildew present very specific cleaning issues at a flood site. The Gulper II is designed specifically for water recovery with a powerful vacuum motor that extracts water and small debris quickly.

Capacity ................................................................................................................................................... 2,000 lbs.

Minimum Height.............................................................................................................................................. 8-1/2”

Maximum Height........................................................................................................................................... 30-1/2"

Sideways Adjustment L/R ........................................................................................................................... 30°

  • Large Capacity Hopper
    • Holds up to 13 gallons of materials for less time spent refilling
  • SmartStart System
    • Innovative system automatically starts pump and compressor when gun trigger is pulled, and shuts them off when released
    • Provides a soft-start to eliminate material blast that can impact finish
    • Reduces noise and vibration
    • Extends life of pump and compressor
  • WideTex Tips & Adapter
    • Allows spraying in a uniform fan pattern
    • Spray repeatable patterns with less material and pressure adjustment
    • Increases productivity by more than 20%

5/8" x 100' Cable

For 3"-6" lines

5/8" x 50' Cable

For 3"-6" Lines

1/2" X 50' Sewer Auger

For 2"-3" lines

5/8” diameter for 3” to 6” lines.

100 ft. x 5/8” (100EM4) cable

 

Clear clogged drains in 2", 3” and most 4" drain lines.

POD with Self-Leveling Color

Camera, 200 ft. Gel-Rod, and

Sonde.

Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe and more

Our Cut-n-Break method is the natural choice when you need to cut deep without overcutting at the corners. The K 760 Cut-n-Break enables you to cut as deep as 16" from one side. The two high-speed blades make a core in the saw cut, which can then easily be broken off using the accompanying breaking tool.

Engine:  Performance-proven Honda OHV engine with low-oil protection and recoil start

Frame:  Reinforced powder coated steel tube frame with center balanced lifting hook · Wand holder · Solid steel threaded axles · Flat-free tires · Locking tire brake

Components:  High quality fuel filter/water separator ensures clean fuel supply · Complete system diagnostic board · On/off burner switch · Pressure and high limit safety controls · No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time) · Polyethylene burner fuel tank · Easy coil drain helps prevent freezing in cold weather · Energy efficient top fired powder coated heat exchanger designed for convenient troubleshooting and easy maintenance

Unit Includes:  Quick connect nozzles (0, 15, 25 and 40-degree) · 50

The F6 Downdraft® Dryer is the most versatile air mover available with multiple positions for every drying need. The 6-bladed precision pitched fan blade pulls warmer, drier air down through the dryer, blowing it across the entire room for maximum drying productivity.

13" FLOOR POLISHER

Multi purpose tool

             This iron features a low profile that glides easily under carpets and permits the seam to be joined close to the back of the iron - where the adhesive is still hot. "U" - shaped handle provides strength and also features a 3-position stain relief. Special "angle-out" tip design prevents "dragging-off" the hot melt adhesive when removing the iron at the end of the seam. Heat settings are adjustable between 250° and 425° F, permitting seaming speeds up to 4' per minute.
Other features include an 8' long cord, riveted iron tray, and power indicator light. The built-in heat shield protects sensitive pile fibers and synthetic backings.

* Ideal for applying non-slip finish to newly finished concrete surfaces
* Threaded hole accepts any standard broom handle
* Long wearing Black polypropylene bristles
* 2-1/4" bristles
* 24" length

12' FBG Step Ladder

14' FBG Step Ladder

40' Aluminum Extension Ladder

28' Aluminum Extension Ladder

Patio heaters come with a full 20lb propane tank

Makes the job of laying out your flooring much easier.